Electrical Generators for Large Wind Turbine: Trends and Challenges

Abstract

This paper presents an overview of the emerging trends in the development of electrical generators for large wind turbines. To describe the developments in the design of electrical generators, it is necessary to look at the conversion system as a whole, and then, the structural and mechanical performances of the drive train need to be considered. Many drive train configurations have been proposed for large wind turbines; they should ensure high reliability, long availability and reduced maintainability. Although most installed wind turbines are geared, directly driven wind turbines with permanent magnet generators have attracted growing interest in the last few years, which has been in parallel to the continuous increase of the per unit turbine power. The aim of this work is to present the recent commercial designs of electrical generators in large wind turbines. Both the strengths and weaknesses of the existing systems are discussed. The most emerging technologies in high-power, low-speed electrical generators are investigated. Furthermore, a comparative analysis of different electrical generator concepts is performed, and the generators are assessed upon a list of criteria such as the mass, cost, and mass-to-torque ratio. Within the framework of these criteria, it may help to determine whether the electrical generator is technically feasible and economically viable for high-power wind turbines. Finally, this review could help to determine suitable generators for use in large and ultra-large wind energy systems.

Keywords

• large wind turbine
• permanent magnet
• multi-megawatt generator
• wind energy conversion system
• direct drive
• gearless