Broadband Frequency Selective Rasorber Based on Spoof Surface Plasmon Polaritons

Abstract

A broadband frequency selective rasorber (FSR) based on spoofsurface plasmon polaritons (SSPP) is proposed. The FSR is composed of a multi-layer structure comprising frequency selective surface (FSS)-polyresin (PR)-indium tin oxide (ITO)-PR-FSS and placed vertically on a metal base plate. A periodic square cavity structure is formed. The transmission characteristics of the FSR are studied by full-wave simulation and equivalent circuit method. The simulation results demonstrate that under normal incidence, the absorption rate of the structure remains 95% in the 5–30 GHz band, and the absorption rate is also 80% in the 3.5–5 GHz band. As the incident angle of the electromagnetic wave increases to 40°, the absorption rate in the 15–20 GHz band decreases to 70% in the transverse electric (TE) mode, and the absorption rate in the transverse magnetic (TM) mode is almost the same as that of vertical incidence. The transmission response of the structure is measured in an anechoic chamber. The measurement results agree well with the simulation results, proving the reliability of the design and fabrication. The structure is less sensitive to the incident angle of magnetic waves and has a better broadband absorbing ability.

Keywords

• frequency selective rasorber (FSR)
• spoof surface plasmon polaritons (SSPP)
• frequency selective surface (FSS)
• broadband