Lamellar Spacing Modelling for LPBF Aluminum Parts

Abstract

The high cooling rates reached during metal additive manufacturing (MAM) generate microstructures very different from those obtained by other conventional manufacturing methods. Therefore, research about the modeling of this type of microstructure is of great interest to the MAM community. In this work, the prediction of the lamellar spacing of an AlSi10Mg sample manufactured by laser powder bed fusion (LPBF), is presented. A multiscale approach is used, combining a CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry) model to predict the material properties, with a macroscale model of the sample manufacturing and with a microscale model to predict the microstructure. The manufacturing and metallographic characterization of the sample is also included. The results prove that the multiscale strategy followed is a valid approximation to simulate this type of manufacturing process. In addition, it is shown that the use of a generic simulation software focused on metal casting processes can be useful in predicting the lamellar spacing of the microstructure manufactured by LPBF. Finally, the relationship between the cooling rate and the resulting lamellar spacing has been established for this AlSi10Mg under the specific manufacturing conditions considered.

Keywords

• LPBF
• microstructure
• simulation