Inventions (May 2023)
Development of a 3D Printed New Metering Mechanism for a Multi-Crop Seed Broadcasting System Using an Autonomous Small-Scale Vehicle
Abstract
Developing countries in Asia widely use manual seed broadcasting methods due to a lack of appropriate seeding machinery. The agricultural sector is currently facing labor shortages and high labor costs, especially seasonal labor shortages for broadcasting and transplanting operations. However, the primary constraint in adopting existing broadcasting seeders for small-scale farmers in developing countries is the high initial purchase costs. Therefore, developing locally commercial accessible technology for small-scale farmers is an urgent requirement. In this regard, attempt was taken to develop a new low-cost 3D printed seeder that can be used for multi-crop seed broadcasting operations when integrated with an autonomous terrain vehicle. A new seed metering mechanism was proposed for seed broadcasting that can be controlled electronically from the autonomous terrain vehicle. Positional sensors based on the real time kinematics—global navigation satellite system (RTK-GNSS) were used to record positional information. The best observation was noted at a vehicle operational speed of 0.351 ms−1 and had a coefficient of variation (CV) referring to the distribution uniformity of seeds of 19% for green peas, 22% for cowpeas, and 25% for chickpeas. The developed seeder could spread multi-crop seeds and adjust the seed rates electronically at the different ranges of rotational speeds. Therefore, the use of 3D printed fabricated prototype seed broadcasting units with small-scale autonomous vehicles can be implemented to help in labor supplements and perform the broadcasting of different seeds.
Keywords