Mechanical properties and acoustic emission characteristics of two dissimilar layers of rock-like specimens with prefabricated parallel fissures

Abstract

Abstract Through the uniaxial compression test of double parallel fissured layered rock mass, the mechanical properties of layered rock mass with different fissure dip angle, and the characteristics of acoustic emission (AE) parameters in the process of fracture are studied. The influence of fissure dip angle on the progressive damage, and macroscopic fracture of layered rock mass is explored. The fracture mode, local stress variation characteristics, and stress field evolution law of fissured layered rock mass are analyzed from a mesoscopic point of view. The results show that with the increase of the fissure dip angle α, the peak strength and the elastic modulus of the layered rock mass decrease first and then increase. The low frequency-high amplitude (LF-HA) signals of AE all appear in the crack propagation stage. With the increase of fissure dip angle α, the LF-HA signal ratio increases first, then decreases and then increases, and shows significant stage characteristics. The cracks are mainly generated around the relatively low strength A rock and prefabricated fissures, and all pass through the interface between A rock and B rock. Eight types mesoscopic displacement field models are found, and the final failure mode of the model is tensile-shear mixed failure. The upper and lower regions of the fissure are tensile stress areas, while the left and right regions are compressive shear stress areas, which are distributed in a “butterfly” type. The stress difference at the fissure tip is negatively correlated with the mechanical parameters of the layered rock mass.

Keywords

• Layered rock mass
• Parallel fissures
• AE characteristics
• Stress field evolution
• Fracture mode