Experimental and Numerical Study of Pressure Drop Characteristics of Soybean Grain under Vertical Pressure

Abstract

The vertical pressure lead to increased airflow resistance through the grain bulk, which affected the efficiency of ventilation and drying. The effects of vertical pressures at 50, 150, and 250 kPa on the pressure drop characteristics of soybeans were studied using experiment and numerical simulation. The random packing and different compression states for soybean packed beds were generated by the Discrete Element Method (DEM). The Discrete Element Method (DEM) and Computational Fluid Dynamics (CFD) were coupled to investigate the radial velocity and pressure drop of soybean bulk. The simulation results showed that the radial porosity had an oscillating distribution, and the radial average dimensionless velocity was consistent with the distribution trend of porosity. The increase in vertical pressure causes a decrease in porosity and an increase in local velocity. The PathFinder code was used as a supplementary method to calculate the pore path and pore characterization parameters, and the resistance coefficient term in the Forchheimer equation was determined. The compression of soybeans measured by the experiment mainly occurred within two hours after loading. The pressure drop of soybeans increased with the vertical pressure, with the average pressure drop at vertical pressures of 50, 150, and 250 kPa being 36%, 57%, and 92% higher than the uncompressed state (0 kPa). The pressure drop of soybeans calculated by the DEM-CFD method and the Forchheimer equation under different vertical pressures were in close agreement with the experimental results, and an average relative difference was found to be less than 10%. These results provide guidance for estimating the pressure drop of soybeans at different grain depths.

Keywords

• vertical pressure
• soybean grain
• pressure drop
• DEM-CFD
• PathFinder code