Advances in Additive Friction Extrusion Deposition (AFED): Process and Tool Design

Abstract

Additive friction extrusion deposition (AFED) is a recently developed additive manufacturing technique that promises high deposition rates at low forces. Due to the novelty of the process, the underlying phenomena and their interactions are not fully understood, and in particular, the processing strategy and tool design are still in their infancy. This work contributes to the state-of-the-art of AFED through a comprehensive analysis of its working principles and an experimental program, including a representative sample component. The working principle and process mechanics of AFED are broken down into their individual components. The forces and their origins and effects on the process are described, and measures of process efficiency and theoretical minimum energy consumption are derived. Three geometrical features of the extrusion die were identified as most relevant to the active material flow, process forces, and deposition quality: the topography of the inner and outer circular surfaces and the geometry of its extrusion channels. Based on this, the experimental program investigated seven different tool designs in terms of efficiency, force reduction, and throughput. The experiments using AA 6061-T6 as feedstock show that AFED is capable of both high material throughput (close to 550 mm3/s) and reduced substrate forces, for example, the forces for a run at 100 mm3/s remained continuously below 500 N and for a run at 400 mm3/s below 3500 N. The material flow and microstructure of AFED were assessed from macro-sections. Significant differences were found between the advancing and retracting sides for both process effects and material flow. Banded structures in the microstructure show strong similarities to other solid-state processes. The manufacturing of the sample components demonstrates that AFED is already capable of producing industrial-grade components. In mechanical tests, interlayer bonding defects resulted in more brittle failure behavior in the build direction of the structure, whereas in the horizontal direction, mechanical properties corresponding to a T4 temper were achieved.

Keywords

• FSAM
• AFED
• additive manufacturing
• aluminum
• tool design
• process optimization