Effects of Functionalized Kraft Lignin Incorporation on Polypropylene Surface Energy and Practical Adhesion

Abstract

Polypropylene (PP) is a multifunctional and widely applied polymer. Nevertheless, its low energy surface and poor adhesion are well-known and might impair some prospective applications. Aiming to overcome these limitations, PP composites can be applied as a tool to enhance PP surface energy and then increase its practical adhesion. In this work, Kraft lignin (KL) was chemically modified and blended with PP. In short, KL was hydroxypropylated and further reacted with acetic anhydride (A-oxi-KL) or maleic anhydride (M-oxi-KL). Lignin modifications were confirmed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). PP-composites with different lignin contents, as well as pristine PP, were characterized in terms of their thermal behavior, morphology, surface energy, and practical adhesion by DSC, scanning electron microscopy (SEM), contact angle measurement, and peeling tests, respectively. Lignin incorporation did not affect the PP degree of crystallization. The lignin modifications led to a better compatibility with the PP matrix and surface energies up to 86% higher than neat PP. Increases of up to 66% in the peel strength were verified. Composites with M-oxi-KL showed the best adhesion performance, confirming the lignin functionalization is an efficient approach to improve the practical adhesion of PP films.

Keywords

• lignin
• surface energy
• wettability
• practical adhesion