Numerical Simulation of Critical Production Pressure Drop of Injection and Production Wells in Gas Storage Based on Gas-Solid Coupling

Abstract

The periodic injection-production process of natural gas in underground gas storage make the rock bear alternating load under the gas-solid coupling. The alternating load changes the physical properties of rock, and then influence the critical production pressure drop of injection-production wells in gas storage. In the case of gas-solid coupling, the decisive factors affecting the alternating load are the number of injection-production cycles and the injection-production differential pressure. Therefore, a discrete element numerical simulation model is established to simulate the gas-solid coupling process of gas storage wells under different injection-production cycle and differential pressure. The influence mechanism of injection-production cycle and differential pressure on particle cementation and primary crack is analyzed microscopically and also the influence law of injection-production cycle and differential pressure on rock mechanical properties is analyzed from the macroscopic. Finally, the influence law of injection-production cycle and differential pressure on the critical production pressure drop of injection-production wells due to gas-solid coupling can be obtained. The results show that under the influence of gas-solid coupling, the number of bonded contact cracks and micro cracks in the model increase gradually, both the elastic modulus ratio and the cohesion ratio decrease gradually with the increase of injection-production cycle and the higher the injection-production differential pressure, the greater the decline range. Then, with the injection-production cycle increasing the Poisson’s ratio increases gradually and the higher the injection-production differential pressure, the greater the increase range. Finally, the internal friction angle ratio increases greatly in the initial stage, after that decreases and then shows a linear increase. According to the influence law, the relationship model between the critical production pressure drop of injection-production wells in gas storage and the injection-production cycle and differential pressure under the gas-solid coupling will be established, which is used for the dynamic prediction of the critical production pressure drop of injection-production wells in the whole life cycle of gas storage.

Keywords

• gas-solid coupling
• numerical simulation
• modeling
• injection-production differential pressure