CFD Analysis of Convective Heat Transfer in a Vertical Square Sub-Channel for Laminar Flow Regime

Abstract

The development of new practices in nuclear research reactor safety aspects and optimization of recent nuclear reactors needs knowledge on forced convective heat transfer within sub-channels formed between several nuclear fuel rods or heat exchanger tubes, not only in the fully developed regime but also in the developing regime or laminar flow regime. The main objective of this research was to find a new correlation equation for calculating the convective heat transfer coefficient in the vertical square sub-channels. Recently, a simulation study was conducted to find a new heat transfer correlation equation for calculating the convective heat transfer coefficient within a vertical square sub-channel in the developing regime or laminar flow regime for Reynolds number range 400 ≤ Re ≤ 1700. Simulations were carried out using a computational fluid dynamics (CFD) code and modeling already defined in the software. The novelty of the research lies in the analysis of the entrance effect for the sub-channel by proposing a new empirical correlation that can then be inserted into the STAT computer code. The surface temperature distribution around the tangential direction of the active cylinders shows that the implementation of active and dummy cylinders in the current study can simulate sub-channels that exist in a real nuclear reactor core. The current study shows that the flow simulated in this study is in its developing condition (entrance region). A new forced convective heat transfer correlation for the developing region in the form of Nu = 2.094(Gz)0.329 for the Graetz number range 161 ≤ Gz ≤ 2429 was obtained from the current study.

Keywords

• CFD code
• developing regime
• convection
• sub-channel
• vertical cylinder