Two techniques for calculating design base shear

Abstract

Performance-Based Plastic Design (PBPD) method has been recently developed to achieve the enhanced response of structures to earthquake. To reach this goal, several ways have been suggested. In this paper, the schemes of calculating base shear in the (PBPD) procedure will be studied. Two techniques of determining base shear will be used. The base shear of two steel moment frames will be found by these two processes. By using the difference between the input energy and the elastic strain energy to obtain the plastic energy, the plastic design is then performed to detail the frame members in order to achieve the intended yield mechanism and behavior. The inelastic seismic behaviors of the four frames were studied through nonlinear static and dynamic analyses. These two suggested techniques and their comparisons have not been proposed yet. This kind of plastic design has three main parts. Calculating base shear is the first and important portion. The second part consists of the member plastic design for flexible behavior. To design elastic members by using column trees is the third and last part. Throughout this study is devoted to present two methods for calculating base shear. The moment frames will be investigated in this article.

Keywords

• base shear
• performance-based plastic design
• yield point spectra
• energy
• target displacement
• yield mechanism