International Journal of Polymer Science (Jan 2022)

Development of Lightweight Polymer Laminates for Radiation Shielding and Electronics Applications

  • S. Vignesh,
  • J. T. Winowlin Jappes,
  • S. Nagaveena,
  • R. Krishna Sharma,
  • M. Adam Khan,
  • Chaitali V. More,
  • N. Rajini,
  • Temel Varol

DOI
https://doi.org/10.1155/2022/5252528
Journal volume & issue
Vol. 2022

Abstract

Read online

The present study portrays the development of lightweight epoxy laminates filled with boron carbide (B4C) and lead (Pb) particles through a novel layered molding and curing route. Six different laminates of single and tri-layers were prepared with varying compositions and were subjected to thermal, radiation shielding, and dielectric studies. Radiation shielding test were done using a narrow beam setup with six different sources such as Cobalt-57 (Co57-122 keV), Barium-133 (Ba133-356 keV), Sodium-22 (Na22-511 and 1275 keV), Cesium-137 (Cs137-662 keV), Manganese-54 (Mn54-840 keV), and Cobalt-60 (Co60-1170 and 1330 keV). The dielectric studies were done to understand the dielectric constant, dielectric loss factor, and AC conductivity at different temperature and frequency ranges. From the characterizations, it was found that the thermal stability of the single-layered sample increased with respect to the addition of B4C and Pb particles, which may be due to the thermally stable nature of the particles. The radiation shielding study of the samples witnessed the superior characteristics and radiation shielding ability of sample D (40% Pb) and sample E with Pb cladding at incident gamma radiation energy of 662 keV. The dielectric constant of the samples increased significantly at higher temperatures and the dielectric loss factor increased with an increase in temperature and decreased with an increase in frequency. The AC conductivity of the samples increased with respect to an increase in temperature and frequency.