Polymers (Nov 2021)

Influence of Ionomer Content in the Catalytic Layer of MEAs Based on Aquivion<sup>®</sup> Ionomer

  • Irene Gatto,
  • Ada Saccà,
  • David Sebastián,
  • Vincenzo Baglio,
  • Antonino Salvatore Aricò,
  • Claudio Oldani,
  • Luca Merlo,
  • Alessandra Carbone

DOI
https://doi.org/10.3390/polym13213832
Journal volume & issue
Vol. 13, no. 21
p. 3832

Abstract

Read online

Perfluorinated sulfonic acid (PFSA) polymers such as Nafion® are widely used for both electrolyte membranes and ionomers in the catalytic layer of membrane-electrode assemblies (MEAs) because of their high protonic conductivity, σH, as well as chemical and thermal stability. The use of PFSA polymers with shorter side chains and lower equivalent weight (EW) than Nafion®, such as Aquivion® PFSA ionomers, is a valid approach to improve fuel cell performance and stability under drastic operative conditions such as those related to automotive applications. In this context, it is necessary to optimize the composition of the catalytic ink, according to the different ionomer characteristics. In this work, the influence of the ionomer amount in the catalytic layer was studied, considering the dispersing agent used to prepare the electrode (water or ethanol). Electrochemical studies were carried out in a single cell in the presence of H2-air, at intermediate temperatures (80–95 °C), low pressure, and reduced humidity ((50% RH). %). The best fuel cell performance was found for 26 wt.% Aquivion® at the electrodes using ethanol for the ink preparation, associated to a maximum catalyst utilization.

Keywords