Quantitative analysis of the micromechanical behavior and work hardening in Fe-0.1C–10Mn steel via in-situ high-energy X-ray diffraction

Abstract

In the current work, the micromechanical behavior and work hardening behavior of Fe-0.1C–10Mn (in wt.%) steel deformed at 100, 63, 25 and −50 °C were investigated via in-situ high-energy X-ray diffraction (HE-XRD) technique. As the deformation temperature decreased, the yield strength (YS) and ultimate tensile strength (UTS) increased, while the total elongation (TE) reached a maximum value at 25 °C. The transformation kinetics of retained austenite (RA) was fitted by the Olson and Cohen (OC) model. The phase stress and flow stress contributed by the constituent phases were obtained based on the lattice strain and the volume fraction of the corresponding phase. The work hardening rate was decomposed into four contributors related to the TRIP effect and load partitioning, ie., the austenite phase stress, load partitioning between austenite and martensite, martensitic formation rate and load partitioning between ferrite and austenite. The influence of each contributor on the work hardening behavior was quantitatively evaluated and stacked, the stacked results agreed reasonably well with the experimental work hardening rate obtained from the true stress-strain curve. Finally, the volume fraction of austenite to martensite transformation promoted by the Lüders band (LB) and the stacking fault energy (SFE) of RA were found to be highly temperature-dependent. A linear relationship was revealed between the volume fraction of austenite to martensite transformation during the LB propagation and the SFE of RA. These findings offer insights into the TRIP effect and the LB propagation in medium-Mn steels.

Keywords

• High-energy X-ray diffraction
• Medium-Mn steels
• TRIP effect
• Work hardening behavior
• Stacking fault energy