Erosion Mechanism of a Cavitating Jet on Groove Roughness

Abstract

The erosion behavior of a cavitating jet on groove roughness was investigated experimentally using mass-loss characteristics, scanning electron microscopy (SEM) observation, time-resolved shadowgraph, and schlieren flow visualizations. The wall morphology of the cavitating-jet erosion on the groove roughness indicated an increased mass loss, which was highly increased along the groove rather than across the groove. Furthermore, increased erosion pits were observed on the groove bottom along the grooves. The shadowgraph imaging of the cavitating jet on the rough wall showed noncircular cavitation bubble distributions along and across the grooves, which corresponds to the increased number of cavitation bubbles along the grooves and the decreased number of bubbles across the grooves. This result is consistent with the erosion morphology of the groove roughness. Schlieren imaging indicated that the frequency and intensity fluctuation of the shockwave formation did not change significantly on the groove roughness along and across the grooves. The findings in the study show that the increased erosion mechanism on groove roughness is caused by the increased number of impulsive forces and the shockwave focusing effect on the groove bottom.

Keywords

• cavitating jet
• erosion mechanism
• groove roughness
• SEM observation
• shadowgraph
• schlieren