An investigation of hot deformation behavior of Zn–22Al alloy and development of its processing maps during isothermal compression

Abstract

In this paper, the hot deformation behavior of Zn–22Al alloy was investigated by performing hot compression tests under different deformation conditions. The Arrhenius-type constitutive model was developed and the constants were determined for this alloy. In addition, the processing map was constructed using the principle of the dynamic materials model (DMM). The results show that the Arrhenius-type model, with an activation energy of 63.722 kJ/mol, can provide an accurate prediction of the flow behavior of the alloy at various conditions. The higher energy dissipation efficiency was observed in the high-temperature ranges and low strain rates. The results showed that the unstable processing zone of Zn–22Al alloy has mainly occurred at high strain rates and low-temperature region. Besides, it is found that the strain has less significant effects on instability parameter and power dissipation efficiency.

Keywords

• Hot deformation
• Compression
• Processing map
• Zinc alloys