Effect of the burnable absorber arrangement on the VVER-1200 fuel assembly neutronic performance

Abstract

Optimizing the use of fuel in a power reactor is a task of current concern. However, little attention has been given to investigating the dependences among the enrichment used, the content of gadolinium oxide in fuel elements, and the life time in combination with assessing the efficiency of using Gd fuel elements with different Gd2O3 contents. The paper considers fuel assembly (FA) versions for VVER-1200 reactors having different enrichments for fuel elements, including those with Gd, and different contents of gadolinium oxide in fuel. A comparative analysis is presented for assemblies with homogeneous Gd2O3 arrangements in each fuel element and with profiled Gd2O3 arrangements. In the latter case, profiling depends on the neutron flux density in the layer which includes Gd fuel elements. This suggests that the arrangement of gadolinium oxide proportionally to the neutron flux density will improve the FA neutronic performance. The results were obtained using SERPENT (a continuous-energy multi-purpose three-dimensional Monte Carlo particle transport code). The assemblies with the used parameters for a 12-month fuel cycle have shown the method under consideration to be inefficient for a period of over 300 eff. days. With increased enrichment and content of gadolinium oxide, the use of profiled versions has turned out to be more rational for longer periods (up to 900 eff. days). Therefore, this phenomenon is relevant for the reactor life, whereas it proves to be insignificant for the fuel life. A complex relationship is noted between the gadolinium and uranium content in an assembly and the effective multiplication factor for the profiled and standard assemblies. This relationship requires further detailed consideration.

Keywords

• Burnable absorber
• optimal profili