Effect of Process Parameters on Stress Field of Laser Additive Manufacturing

Abstract

In order to optimize the additive manufacturing process and find the process parameters affecting the mechanical properties of the parts, an additive manufacturing simulation model of Ti-6Al-4V titanium alloy was established, and the effects of ambient temperature, substrate thickness and wire temperature on the stress field and residual stress field were analyzed. The results show that the ambient temperature is inversely proportional to the residual stress of the cladding layer, while the substrate thickness and wire temperature are positively correlated to the residual stress of the cladding layer. When the ambient temperature increases from 0 °C to 600 °C, the maximum residual stress decreases by 36.0%, the maximum residual stress increases by 10.0% when the substrate thickness increases from 25 mm to 55 mm and the maximum residual stress increases by 7.48% when the temperature increases from 0 °C to 600 °C. The influence of the three parameters on the maximum residual stress is as follows: ambient temperature > substrate thickness > wire temperature. The research results can provide reference for stress control during actual manufacturing.

Keywords

• additive manufacturing
• process parameters
• residual stress
• Ti-6Al-4V titanium alloy