Applied Sciences (Feb 2024)
Experimental Study and Bearing Capacity Calculation of Compression-Reinforced Concrete Columns Strengthened with Ultra-High-Performance Concrete
Abstract
A total of five ultra-high-performance concrete (UHPC)-strengthened reinforced concrete (RC) columns and one RC column were built and subjected to eccentric compression testing to examine the force performance of UHPC-strengthened eccentrically compressed plain RC columns. This experimental study examined the crack progression, the damage morphology, the deformation ability, the maximum load-carrying capacity, and the ductile properties of the eccentrically compressed columns. It also investigated the impacts of eccentricity, the reinforcement thickness, and the addition of steel fibers on the effectiveness of reinforcement. The cracking load, peak load, and ductility coefficient of the UHPC-reinforced specimens were increased by 100.28%, 172.30%, and 56.30%, respectively, compared with the RC column at an initial eccentricity of 50 mm. As the eccentricity distance increased, the bearing capacity of the UHPC eccentrically compressed specimens decreased, and the deformation capacity increased. Increasing the steel fiber dosage within the appropriate range decreased the crack width of the specimen. The addition of 2% steel fiber resulted in a 24.8% increase in cracking load, an 8.96% increase in peak load, and a 2.60% increase in ductility coefficient compared to the addition of 1% steel fiber. However, the reinforcing effect of UHPC was weakened under high eccentric pressures. Based on the theory of concrete structure and mechanical principles, the formula for calculating the compressive bearing capacity of RC columns strengthened with high-performance concrete was proposed. The results of calculating the positive section bearing capacity of eccentrically compressed RC columns reinforced with high-performance concrete are in good agreement with the test values. The results of this paper provide an experimental basis and theoretical foundation for the cross-sectional design of UHPC eccentrically compressed columns.
Keywords
