Comparative Study on the Friction Behaviour and the Particle Formation Process between a Laser Cladded Brake Disc and a Conventional Grey Cast Iron Disc

Abstract

Brake-wear particle emissions are the result of the components of a friction brake being in tribological contact, and they are classified as non-exhaust emissions. Since most of the emitted particles belong to the size classes of particulate matter (≤10 μm) and differ significantly in terms of their physico-chemical properties from automotive exhaust emissions, this source is of particular relevance to human health and, therefore, the focus of scientific studies. Previous studies have shown that coated brake discs offer significant wear and emission reduction potential. Nevertheless, no studies are available that describe the specific particle formation process, the contact conditions, the structure of the friction layer and the differences compared to conventional grey cast iron discs. The aim of this study is to describe those differences. For this purpose, the tribological behaviour, the structure of the friction layer and the associated particle dynamics within the friction contact between a laser cladding coated disc and a conventional grey cast iron disc are compared. The required investigations are carried out both ex situ (stationary) and in situ (dynamic). Parallel to the tribological investigations, the particle emission behaviour is determined on an inertia dynamometer using a constant volume sampling system (CVS) and equipment for particle number and particle size distribution measurement. The results show that, for two different brake pads, the laser cladding brake disc has lower wear and less particulate emissions than the grey cast iron brake disc. The wear behaviour of the coating varies significantly for the two brake pads. By contrast, the grey cast iron brake disc shows a significantly lower influence.

Keywords

• laser cladding
• brake disc
• brake-wear particle emissions
• tribology