Journal of Rock Mechanics and Geotechnical Engineering (Oct 2016)

Stone column settlement performance in structured anisotropic clays: the influence of creep

  • Brian G. Sexton,
  • Bryan A. McCabe,
  • Minna Karstunen,
  • Nallathamby Sivasithamparam

DOI
https://doi.org/10.1016/j.jrmge.2016.05.004
Journal volume & issue
Vol. 8, no. 5
pp. 672 – 688

Abstract

Read online

The recently developed elasto-viscoplastic Creep-SCLAY1S model has been used in conjunction with PLAXIS 2D to investigate the effectiveness of vibro-replacement in a creep-prone clay. The Creep-SCLAY1S model accounts for anisotropy, bonding, and destructuration, and uses the concept of a constant rate of viscoplastic multiplier to calculate creep strain rate. A comparison of settlement improvement factors with and without creep indicates that ‘total’ settlement improvement factors (primary plus creep) are lower than their ‘primary’ counterparts (primary settlement only). The lowest settlement improvement factors arise for analyses incorporating the effect of bonding and destructuration. Examination of the variations of vertical stress with time and depth has indicated that vertical stress is transferred from the soil to the column as the soil creeps. This results in additional column yielding. In addition, the radial and hoop stresses in the soil are lower for the ‘creep’ case. The reduced radial stresses lead to additional column bulging and hence more settlement, whereas the hoop stress reductions appear to be a secondary effect, caused by additional plastic deformation for the ‘creep’ case.

Keywords