Micromachines (Nov 2022)
A Wind-Driven Rotating Micro-Hybrid Nanogenerator for Powering Environmental Monitoring Devices
Abstract
In recent years, environmental problems caused by natural disasters due to global warming have seriously affected human production and life. Fortunately, with the rapid rise of the Internet of Things (IoT) technology and the decreasing power consumption of microelectronic devices, it is possible to set up a multi-node environmental monitoring system. However, regular replacement of conventional chemical batteries for the huge number of microelectronic devices still faces great challenges, especially in remote areas. In this study, we developed a rotating hybrid nanogenerator for wind energy harvesting. Using the output characteristics of triboelectric nanogenerator (TENG) with low frequency and high voltage and electromagnetic generator (EMG) with high frequency and high current, we are able to effectively broaden the output voltage range while shortening the capacitor voltage rising time, thus obtaining energy harvesting at wide frequency wind speed. The TENG adopts the flexible contact method of arch-shaped film to solve the problem of insufficient flexible contact and the short service life of the rotating triboelectric generator. After 80,000 cycles of TENG operation, the maximum output voltage drops by 7.9%, which can maintain a good and stable output. Through experimental tests, the maximum output power of this triboelectric nanogenerator is 0.55 mW at 400 rpm (wind speed of about 8.3 m/s) and TENG part at an external load of 5 MΩ. The maximum output power of the EMG part is 15.5 mW at an external load of 360 Ω. The hybrid nanogenerator can continuously supply power to the anemometer after running for 9 s and 35 s under the simulated wind speed of 8.3 m/s and natural wind speed of 5.6 m/s, respectively. It provides a reference value for solving the power supply problem of low-power environmental monitoring equipment.
Keywords
