25–34 GHz Single-Pole, Double-Throw CMOS Switches for a Ka-Band Phased-Array Transceiver

Abstract

This paper presents two single-pole, double-throw (SPDT) mm-wave switches for Ka-band phased-array transceivers, fabricated with a 65-nm complementary metal oxide semiconductor (CMOS) process. One switch employs cross-biasing (CB) control with a single supply, while the other uses dual-supply biasing (DSB) control with positive and negative voltages. Negative voltages were generated internally, using a ring oscillator and a charge pump. Identical gate and body floated N-type metal oxide semiconductor field effect transistors (N-MOSFETs) in a triple well were used as the switch core transistors. Inductors were used to improve the isolation between the transmitter (TX) and receiver (RX), as well as insertion loss, by canceling the parasitic capacitance of the switch core transistors at resonance. The size of the proposed radio frequency (RF) switch is 260 μm × 230 μm, excluding all pads. The minimum insertion losses of the CB and DSB switches were 2.1 dB at 28 GHz and 1.93 dB at 24 GHz, respectively. Between 25 GHz and 34 GHz, the insertion losses were less than 2.3 dB and 2.5 dB, the return losses were less than 16.7 dB and 17.3 dB, and the isolation was over 18.4 dB and 15.3 dB, respectively. The third order input intercept points (IIP3) of the CB and DSB switches were 38.4 dBm and 39 dBm at 28 GHz, respectively.

Keywords

• single-pole-double-throw
• CMOS
• RF switch
• Ka-band
• phased-array transceiver
• gate-body floating
• high isolation