Catalysts (Apr 2019)

Epoxidation of Karanja (<i>Millettia pinnata</i>) Oil Methyl Esters in the Presence of Hydrogen Peroxide over a Simple Niobium-Containing Catalyst

  • Nicola Scotti,
  • Nicoletta Ravasio,
  • Claudio Evangelisti,
  • Rinaldo Psaro,
  • Michele Penso,
  • Prashant S. Niphadkar,
  • Vijay V. Bokade,
  • Matteo Guidotti

DOI
https://doi.org/10.3390/catal9040344
Journal volume & issue
Vol. 9, no. 4
p. 344

Abstract

Read online

The synthesis, characterization and catalytic performance of a conceptually simple, novel NbOx-SiO2 catalyst are here described. The niobium(V)-silica catalyst was prepared starting from cheap and viable reactants, by alkaline deposition of NH4Nb(C2O4)2·H2O in the presence of fructose as a stabilizer and subsequent calcination. The NbOx-SiO2 solid (0.95 Nb wt.%) was tested in the liquid-phase epoxidation with aqueous hydrogen peroxide of methyl oleate, as a model substrate. It was then tested in the epoxidation of a mixture of methyl esters (FAMEs) obtained by transesterification with methanol and purification of karanja oil, extracted from the autochthonous Indian variety of Millettia pinnata tree. The catalyst showed a promising performance in terms of methyl oleate conversion (up to 75%) and selectivity to epoxide (up to 82%). It was then tested on the FAME mixture from karanja oil, where interesting conversion values were attained (up to 70%), although with lower selectivities and yields to the mixture of desired epoxidized FAMEs. The solid withstood four catalytic cycles overall, during which a non-negligible surface reorganization of the Nb(V) sites was observed. However, this restructuring did not negatively affect the performance of the catalysts in terms of conversion or selectivity.

Keywords