Assessment of Limestone Waste Addition for Fired Clay Bricks

Abstract

Our aim was to investigate the feasibility of using limestone waste resulting from stone processing for the manufacturing of fired clay bricks. Waste materials were considered as a partial replacement for clays to reduce the exploitation of natural resources and as a response to the climate neutrality commitments. The samples were prepared to have a waste content of up to 15% and were fired at a temperature of 900 °C. The chemical and mineralogical composition and the physical analysis of raw materials were investigated by using SEM–EDS and XRD diffraction. The result showed an increase in CaO in the clay mixture due to the presence of limestone, which reduced the shrinkage of the products’ compressive strength, up to 55% for samples with a higher content of limestone (15 wt.%), and influenced the samples’ color by making them lighter than the reference sample.

Keywords

• fired clay brick
• limestone waste
• circularity
• characterization