Effect of boron on the microstructure and performance of HIP-prepared high boron steels

Abstract

High boron steels containing 2 wt% and 3.3 wt% boron were fabricated using hot isostatic pressing (HIP). The enhanced shielding performance of the steel with higher boron content was quantitatively evaluated through Monte Carlo simulations using software Fluka. The steels were studied with XRD and the phase ratio were calculated using Rietveld refinement method. The microstructure of the materials was investigated using electron backscatter diffraction (EBSD). Comprehensive thermal property measurements, complemented by Hamilton thermal conductivity model analysis, were conducted on high boron steels. The results revealed that the decreased overall thermal conductivity in these materials is primarily attributed to two factors: the increased volume fraction of the boride phase and the enhanced interconnectivity among boride particles. These findings provide crucial insights into the thermal behavior of high boron steels. Room temperature tensile tests indicate that high boron content can cause the fracture mode of the material to transition from ductile to brittle. This study provides a detailed analysis of the effects of boron content on various properties of high boron steels, which can serve as shielding materials in fusion reactors. Advances were proposed for optimizing the thermal performance of high boron steels in this study.

Keywords

• High-boron steel
• Shielding materials
• Thermal conductivity