Journal of Asian Ceramic Societies (Jul 2024)

Effect of yttrium oxide addition on the microstructure and mechanical properties of WC–ni composites fabricated from recycled WC and Ni

  • Hanjung Kwon,
  • Jaemin Song,
  • Doyeon Lee,
  • Jungi Seo,
  • In-Hyeok Choi

DOI
https://doi.org/10.1080/21870764.2024.2361992
Journal volume & issue
Vol. 12, no. 3
pp. 257 – 265

Abstract

Read online

WC-Co composites are widely used in cutting tools but are expensive and harmful due to Co in the composites. Alternatives, such as WC-Ni composites have inferior mechanical properties, as a result, WC-Co composites are used in most cutting tools. This study investigated whether adding yttrium oxide (Y2O3) to WC-Ni composites, fabricated from recycled tungsten carbide (WC) and Ni, improved their mechanical properties. Changes in the composites’ microstructure and mechanical properties depended on the amount of Y2O3 added. Y2O3 reacted with WC during sintering, promoting the formation of W and reducing the proportion of C in the composite. The added Y2O3 accelerated the dissolution of W in the Ni matrix, and increased the fractions of the eta phase and solid solution phase. Ni is strengthened by the dissolution of W in Ni, thereby supplementing the low toughness of the eta phase and ultimately yielding WC – Ni with improved hardness and fracture toughness (HV: max. 15.4 GPa, KIC: max. 13.4 MPa∙m1/2) compared to WC – Ni without Y2O3 (HV: 13.5 GPa, KIC: 12.7 MPa∙m1/2). The method for improving the properties of WC – Ni composites by the addition of Y2O3 has a high possibility of commercialization because it does not necessitate process changes.

Keywords