BioResources (Jul 2024)
Optimization of Measurement and Calculation Methods for Viscoelastic Creep Strain and Mechanical Adsorption Creep Strain during Conventional Drying Process of Pinus sylvestris
Abstract
The traditional measurement method for viscoelastic creep strain and mechanical adsorption creep strain has relatively low accuracy, making it difficult to ensure the data accuracy of specimen strain measurements. In this study, 50-mm-thick Pinus sylvestris sawn timber was used as the research object. Along the thickness direction of the test material, the relationship between the free shrinkage coefficient and the moisture content of the test material was studied to optimize the measurement methods of viscoelastic creep strain and mechanical adsorption creep strain during drying process. The results showed that the optimized measurement method for viscoelastic creep strain, which compensates for dimensional change caused by moisture content changes during the creep recovery phase, was applied to different layers in the thickness direction of the test material. The average relative error at the end of the drying stage was reduced 20.1% compared to the traditional method. For the mechanical adsorption creep strain in different layers of the test material's thickness, the optimized measurement method, based on the free shrinkage size calculated from the free shrinkage coefficient and moisture content, reduced the average relative error 59.1% compared to the traditional method.
