Developing an Efficient Processing System Treatment for the High Concentration of Eucalyptus Chemical Mechanical Pulp Wastewater

Abstract

The current wastewater treatment method shows low efficiency in treating wastewater with high concentrations of chemical mechanical pulp (CMP). Therefore, a chlorine dioxide Pretreatment Anaerobic Treatment (DPAT) was developed and applied to treat the CMP wastewater to obtain higher efficiency, obtaining the following results: The biodegradability of CMP wastewater improved after chlorine dioxide pretreatment. The COD of wastewater treated with chlorine dioxide was reduced from 5634 mg/L to 660 mg/L. The removal rate for chemical oxygen demand (COD) was 88.29%, 29.13% higher than the common anaerobic treatment. The reasons for the high efficiency of the DPAT treatment were that chlorine dioxide pretreatment removed the toxic substances in the original wastewater and thereby promoted the proliferation and growth of the anaerobe. The results show that pretreatment with chlorine dioxide can effectively enhance the biodegradability of high-concentration CMP wastewater. Therefore, DPAT treatment of high-concentration CMP wastewater is beneficial to environmental protection.

Keywords

• chlorine dioxide
• wastewater
• treatment
• DPAT treatment