Water Science and Technology (Mar 2022)
Adsorption of Congo red and tetracycline onto water treatment sludge biochar: characterisation, kinetic, equilibrium and thermodynamic study
Abstract
In this study, readily available inexpensive water treatment sludge (WTS) was used to prepare adsorbent for the removal of Congo red (CR) and tetracycline (TC) from aqueous solutions. The structural characteristics and adsorption properties of WTS biochar were characterised via scanning electron microscope, energy dispersive X-ray spectroscopy, Brunauer-Emmett-Teller and Fourier Transform infrared spectroscopy. In batch experiments, the adsorption factors, kinetics, isothermal curves and thermodynamics of the adsorption properties were investigated. The optimum preparation condition of WTS biochar was 400 °C for 4 h under O2-limited pyrolysis, which exhibited increased specific surface area and pore structures. The best adsorption was observed when the pH of the CR and TC solutions was 7 and 4, respectively. The adsorption process followed the pseudo-second-order model, indicating that the main control step was the chemical adsorption process. Isotherm data were best described by the Langmuir model, and the maximum adsorption capacities for CR and TC were 116.4 and 58.5 mg·g−1, respectively. Thermodynamic parameters revealed that the adsorption process was spontaneous and endothermic. According to the analysis, the adsorption mechanism of CR could be attributed to electrostatic attraction, π–π conjugation and hydrogen bonding, whereas that of TC was potentially associated with cation exchange, complex precipitation, π–π conjugation and hydrogen bonding. HIGHLIGHTS Synthetic dyes and antibiotics have been widely used and are difficult to biodegrade.; In this study, water treatment sludge was prepared, and its adsorption properties of the dye and antibiotics were investigated.; It is a promising adsorbent with stable and efficient adsorption capacity, low cost, environmental protection and safety.;
Keywords
