Current Directions in Biomedical Engineering (Sep 2017)

A multi-institutional survey evaluating patient related QA – phase II

  • Teichmann Tobias,
  • Salz Henning,
  • Schwedas Michael,
  • Howitz Simon,
  • Wiezorek Tilo

DOI
https://doi.org/10.1515/cdbme-2017-0134
Journal volume & issue
Vol. 3, no. 2
pp. 639 – 642

Abstract

Read online

In phase I of the survey a planning intercomparison of patient-related QA was performed at 12 institutions. The participating clinics created phantom based IMRT and VMAT plans which were measured utilizing the ArcCheck diode array. Mobius3D (M3D) was used in phase II. It acts as a secondary dose verification tool for patient-specific QA based on average linac beam data collected by Mobius Medical Systems. All Quasimodo linac plans will be analyzed for the continuation of the intercomparison. We aim to determine if Mobius3D is suited for use with diverse treatment techniques, if beam model customization is needed. Initially we computed first Mobius3D results by transferring all plans from phase I to our Mobius3D server. Because of some larger PTV mean dose differences we checked if output factor customization would be beneficial. We performed measurements and output factor correction to account for discrepancies in reference conditions. Compared to Mobius3D's preconfigured average beam data values, these corrected output factors differed by ±1.5% for field sizes between 7x7cm2 and 30x30cm2 and to −3.9% for 3x3cm2. Our method of correcting the output factors turns out good congruence to M3D's reference values for these medium field sizes.

Keywords