A Proposition for the Estimation of the Maximum Tensile Strength of Variously Charged Nanocellulosic Film Materials Provided by Vacuum Filtration

Abstract

This short investigation deals with a review of the tensile strength properties of six different types of nanocellulose films (carboxymethylated, carboxymethylcellulose-grafted, enzymatically pretreated, phosphorylated, sulfoethylated, and alkoxylated nanocellulose films) manufactured using identical protocols and the determination of the apparent nanocellulose yield of the same nanocelluloses and their tensile strength properties at different extents of delamination (microfluidization). The purpose was to test a previously suggested procedure to estimate the maximum tensile strength on these different procedures. A second goal was to investigate the impact of the nanocellulose yield on the tensile strength properties. The investigations were limited to the nanocellulose research activities at RISE in Stockholm, because these investigations were made with identical experimental laboratory protocols. The importance of such protocols is also stressed. This review shows that the suggested procedure to estimate the maximum tensile strength is a viable proposition, albeit not scientifically proven. Secondly, there is a relationship between the nanocellulose yield and tensile strength properties, although there may not be a linear relationship between the two measures.

Keywords

• nanocellulose
• tensile strength
• delamination
• charge density