Understanding and exploring anisotropy mechanism of mechanical properties for ferrous alloy under different cooling paths

Abstract

To understand and illuminate the anisotropy mechanism of mechanical properties with respect to typical ferrous alloy, two different kinds of microstructures were fabricated by adopting thermo-mechanical controlled processing (TMCP) with identical rolling schedule and different cooling paths, named high coiling temperature process (HC) and low coiling temperature process (LC). The influences of microstructure together with distribution of crystallographic orientation on the anisotropy discipline were investigated, and the anisotropy mechanism were further explored on the basis of plastic deformation theory. Results indicated that the microstructure processed by HC was primarily composed of quasi-polygonal ferrite (QPF) and small fraction of bainitic ferrite (BF). While the LC-processed microstructure predominantly consisted of acicular ferrite (AF), BF as well as martensite-austenite island (M/A). The LC-processed alloy exhibited more obvious anisotropy performance indicated by tensile properties along different tensile directions compared to the HC-processed alloy. There was a phenomenon of uniform distribution of macro-texture and uneven distribution of micro-texture with respect to the both achieved microstructures, and the uneven distribution of micro-texture together with high density of dislocation for BF were responsible for the obvious anisotropy performance of the studied ferrous alloy.

Keywords

• Ferrous alloy
• Anisotropy mechanism
• Thermo-mechanical controlled processing