Metals (Jan 2024)

The Regularities of Metal Transfer by a Nickel-Based Superalloy Tool during Friction Stir Processing of a Titanium Alloy Produced by Wire-Feed Electron Beam Additive Manufacturing

  • Valery Rubtsov,
  • Andrey Chumaevskii,
  • Evgeny Knyazhev,
  • Veronika Utyaganova,
  • Denis Gurianov,
  • Alihan Amirov,
  • Andrey Cheremnov,
  • Evgeny Kolubaev

DOI
https://doi.org/10.3390/met14010105
Journal volume & issue
Vol. 14, no. 1
p. 105

Abstract

Read online

In this work, the interaction of an additively produced Ti-4Al-3V titanium alloy with a nickel superalloy tool and the features of the stir zone formation during friction stir processing have been studied. The stop-action technique was used to produce the samples to be studied using optical and scanning electron microscopy methods, as well as microhardness measurements. As a result, it was revealed that the tool, when moving, forms a pre-deformed area in front of it, which is characterized by a fine-grained structure. The presence of an interface layer between the workpiece material and primary fragmentation by the tool was revealed. It was demonstrated that the transfer of titanium alloy material occurs periodically following the ratio of feeding speed to tool rotation rate. Metal flow around the tool can occur in both laminar and vortex modes, as indicated by the tool material stirred into the transfer layer and used as a marker.

Keywords