Microstructure, wear and corrosion resistance mechanism of as-cast lightweight refractory NbMoZrTiX (X = al, V) high-entropy alloys

Abstract

Refractory high-entropy alloys (RHEAs) have good overall properties and potential high temperature applications, but they are not competitive in terms of light weight and wear and corrosion resistance, which severely limits the wide range of applications. In this paper, novel NbMoZrTi-X (Al, V) light refractory high entropy alloys (LRHEAs) were fabricated and their physical phase composition, microstructure, hardness, and wear and corrosion resistance were systematically investigated. The results show that NbMoZrTi LRHEA and NbMoZrTiV LRHEA are both single BCC structures, while NbMoZrTiAl LRHEA and NbMoZrTiAlV LRHEA are transformed into BCC, B2, and Zr5Al3 phase structures. The hardness increases as the volume fraction of the Zr5Al3 hard phase increases, with NbMoZrTiAl LRHEA having a maximum Vickers hardness of 811.29 HV. Room temperature dry friction tests showed that NbMoZrTiAl LRHEA had the lowest wear and coefficient of friction of 1.5 mg and 0.6713, respectively. Electrochemical tests performed in 3.5 wt% NaCl solution showed that NbMoZrTiAlV LRHEA has excellent corrosion resistance with the highest Ecorr (−0.142 V) and the lowest Icorr (2.149 × 10−7 A/cm2). Therefore, the addition of V and Al to NbMoZrTi-based LRHEA can effectively improve its wear and corrosion resistance due to the increase in hardness and dense passivation film formation. Our study provides a new strategy for designing LRHEAs with a combination of high hardness and excellent wear and corrosion resistance.

Keywords

• Refractory high entropy alloy
• Lightweight
• Microstructure
• Wear
• Corrosion