IEEE Access (Jan 2021)
Voltage Transient Disturbance Detection Based on the RMS Values of Segmented Differential Waveforms
Abstract
Voltage transient disturbance is one of the key voltage quality disturbances, which can be classified into oscillatory transient and impulsive transient. Currently, there is no simple, accurate and general method to detect, extract, and characterize the voltage transient disturbance. This paper proposes a time-domain voltage transient disturbance detection method based on the RMS (root mean square) values of segmented differential waveforms. Firstly, the abnormal voltage waveforms are detected and extracted, which will be used for further analysis. Secondly, the extracted abnormal voltage waveform data are pre-processed, and then each power frequency cycle are processed in segment. Thirdly, by considering the influence of the system frequency variation, the differential waveform can be obtained by calculating the difference between two consecutive cycles. Finally, the voltage transient disturbance is detected by calculating and comparing the segmented RMS values of differential waveforms and steady-state waveforms. The transient component is extracted as well. Four indicators, i.e., dominant frequency, polarity, magnitude and duration, are used to characterize the voltage transient disturbance. In order to verify the accuracy and feasibility of the proposed method, both simulated data from an improved IEEE-13 node test system and actual voltage transient signal from a laboratory experiment are used.
Keywords