Bridgeless modified Cuk–SEPIC power factor correction converter for E-bicycle applications

Shunmathi M.; Julius Fusic S.; Shanmugavel Rajesh; Jayant Giri; Sathish T.; Abdullah Alarifi; S. M. Mozammil Hasnain

doi:10.1063/5.0229333

AIP Advances (Sep 2024)

Bridgeless modified Cuk–SEPIC power factor correction converter for E-bicycle applications

Shunmathi M.,
Julius Fusic S.,
Shanmugavel Rajesh,
Jayant Giri,
Sathish T.,
Abdullah Alarifi,
S. M. Mozammil Hasnain

Affiliations

Shunmathi M.: Department of Mechanical Engineering, Kalasalingam University, Srivilliputhur, Tamil Nadu, India
Julius Fusic S.: Department of Mechatronics Engineering, Thiagarajar College of Engineering, Madurai, Tamil Nadu, India
Shanmugavel Rajesh: Department of Mechanical Engineering, Kalasalingam University, Srivilliputhur, Tamil Nadu, India
Jayant Giri: Department of Mechanical Engineering, Yeshwantrao Chavan College of Engineering, Nagpur, India
Sathish T.: Saveetha School of Engineering, SIMATS, Chennai, Tamil Nadu 602105, India
Abdullah Alarifi: Department of Chemistry, College of Science, King Saud University, Riyadh 11451, Saudi Arabia
S. M. Mozammil Hasnain: Marwadi University Research Center, Department of Mechanical Engineering, Faculty of Engineering and Technology, Marwadi University, Rajkot, Gujarat 360003, India

DOI: https://doi.org/10.1063/5.0229333
Journal volume & issue: Vol. 14, no. 9
pp. 095026 – 095026-13

Abstract

Read online

The focus of this scope is on the single phase Cuk and SEPIC power factor correction converter that is attractive to electric bicycle applications. In order to guarantee improved performance, the proposed modified converter is designed to operate in discontinuous conduction mode, which is hidden by changes in supply and load voltage. For rated load, the investigational study achieves reduced input line total harmonic distortion and unity power factor. Line regulation, high efficiency, and load regulation are achieved by means of a closed loop PI control circuit that has a voltage sensor and current loop. The power supply is simulated using MATLAB/Simulink under various operating conditions, and the designed system is validated using a 250 W hardware prototype. The input current is observed to be perfectly sinusoidal, and the IEC 61000-3-2 class A standard is followed in recording the total harmonic distortion of the mains current.

Published in AIP Advances

ISSN: 2158-3226 (Online)
Publisher: AIP Publishing LLC
Country of publisher: United States
LCC subjects: Science: Physics
Website: http://aipadvances.aip.org/

About the journal