Unsteady Fluid Flows in the Slab Mold Using Anticlogging Nozzles

Abstract

The characterization of the fluid flow of liquid steel in a slab mold, using two nozzle designs under unclogged and clogged conditions, is performed using physical and mathematical simulations. Nozzle A, with an expanding and contracting geometry, yields larger sub-meniscus experimental velocities than nozzle B, with internal flow deflectors. The numerical predictions indicate quick time-changing velocity profiles in the submeniscus region between the mold’s narrow face and the nozzles. The flow deflectors in nozzle B have two effects; the high dissipation rate of kinetic energy in the upper-half length induces lower velocities in the ports than nozzle A. The neutralization of the biased flow caused by the sliding gate allows a balanced fluid through the ports. According to the results, nozzle A yields velocity profiles in the sub-meniscus region with larger standard deviations than nozzle B, leading to an unstable bath surface. The clogged nozzles produced biased-asymmetrical flow patterns in the mold, finding approximated matchings between numerical predictions and experimental measurements. The internal protrusions of the deposits lead to covariance losses of the bath surface wave heights. The use of internal deflectors helped to decrease the amount of clog material in nozzle B.

Keywords

• meniscus velocities
• wave heights
• bath level variations