Tunnel oxide passivated rear contact for large area <em>n</em>-type front junction silicon solar cells providing excellent carrier selectivity

Abstract

Carrier-selective contact with low minority carrier recombination and efficient majority carrier transport is mandatory to eliminate metal-induced recombination for higher energy conversion efficiency for silicon (Si) solar cells. In the present study, the carrier-selective contact consists of an ultra-thin tunnel oxide and a phosphorus-doped polycrystalline Si (poly-Si) thin film formed by plasma enhanced chemical vapor deposition (PECVD) and subsequent thermal crystallization. It is shown that the poly-Si film properties (doping level, crystallization and dopant activation anneal temperature) are crucial for achieving excellent contact passivation quality. It is also demonstrated quantitatively that the tunnel oxide plays a critical role in this tunnel oxide passivated contact (TOPCON) scheme to realize desired carrier selectivity. Presence of tunnel oxide increases the implied Voc (iVoc) by ~ 125 mV. The iVoc value as high as 728 mV is achieved on symmetric structure with TOPCON on both sides. Large area (239 cm2) n-type Czochralski (Cz) Si solar cells are fabricated with homogeneous implanted boron emitter and screen-printed contact on the front and TOPCON on the back, achieving 21.2% cell efficiency. Detailed analysis shows that the performance of these cells is mainly limited by boron emitter recombination on the front side.

Keywords

• tunnel oxide passivated contact
• passivation quality
• open-circuit voltage <em>V_oc</em>
• back-surface-filed saturation current density <em>J_ob’</em>
• large area Si solar cell