Seed Trajectory Control and Experimental Validation of the Limited Gear-Shaped Side Space of a High-Speed Cotton Precision Dibbler

Abstract

In this paper, a cotton precision seed-taking dibbler device was designed to address the problems of congestion and leakage of the hole-type dibbler during high-speed operation (more than 4 km/h). Firstly, the motion trajectory of the seed in the limited gear-shaped space was analyzed and a motion model was established to analyze the relationship between the motion trajectory and seed-filling performance. Secondly, a central combination test with four factors and five levels was implemented using the discrete element software EDEM2018, which simulated the seed-filling performance of the seed-holding space with different structural dimensions. The optimal parameters impacting the seed-filling behavior of the designed dibbler were derived via response surface optimization and multiple regression analyses. Under optimal conditions, three bench tests were repeatedly conducted, and the average qualified index was 93.67%, the leakage index Y3 was 2.67%, and the multiple index Y2 was 3.66%, which was close to the simulation results. Finally, for the speed adaptability test of the seed-holding space with optimal structural parameters, the qualified index was more than 90% when the rotating speed ranged from 1.0 to 2.0 r/s (the speed of the corresponding dibbler was 5.4 km/h to 7.2 km/h), indicating that the dibbler could meet the requirements of high-speed operation and had good speed adaptability. The results can not only provide a reference for the development of precision hole-type dibblers but also have theoretical significance for the quantitative separation of the individual from the population of irregularly rotating agricultural materials and ore materials such as cotton seeds.

Keywords

• agricultural planting machinery
• seed-holding space
• high-speed filling
• parameter optimization