Effect of P and Ti on the agglomeration behavior of Al2O3 inclusions in Fe–P–Ti alloys

Abstract

Nozzle clogging occurs in the interstitial free (IF) steel with high phosphorus (P) more frequently than in IF steel with lower P. To explore the effect of P and Ti on the inclusion behavior in liquid steel, the in situ experiment and theoretical calculations were conducted. High-temperature confocal laser scanning microscopy was used in situ to observe the inclusion behavior at the liquid Fe–P–Ti alloy surfaces, and the attractive and capillary forces were also calculated to quantitatively estimate the effect of P and Ti on the inclusion behavior. The results show that the agglomeration of Al2O3 inclusions involves four steps: dispersed Al2O3 particles in liquid alloy; formation of Al2O3 chain structure; bending of the Al2O3 chain, and sintering and densification of the chain structure. The addition of Ti and P in the steel can increase the agglomeration time of inclusions, indicating the impeding effect of P and Ti on the inclusion aggregation. Furthermore, the orientation factor is proposed to estimate the direction of movement of the small inclusion crossing between large inclusions, and the experimental results confirm its validity.

Keywords

• inclusions
• agglomeration
• if steel with high p
• capillary force