Development and Application of Asynchronous Roll Shifting Strategy of Double Attenuation Work Roll in Hot Rolling

Abstract

In view of the problems of the violent crown fluctuation and unstable shape control in the endless rolling production line, the field measurement results show that the abnormal crown fluctuation is related to the shifting limit position of the work roll after the uneven wear occurs. For this reason, the asynchronous roll shifting strategy is developed, which has double attenuation of roll shifting amplitude and roll shifting step. By coupling the roll wear contour model, the roll thermal contour model and the rolls-strip integrated model, the strip crown calculation model of the whole rolling unit is established, and the causes of abnormal crown fluctuation are revealed theoretically. In addition, the simulation analysis of the important parameters of asynchronous roll shifting strategy of double attenuation working roll is made by using this model. The number of strips in a roll shifting cycle is found to be too large or too small, which is not benefited by the control of the strip crown stability due to the influence of roll wear and roll thermal crown. A rolling unit has many shifting cycles. When the roll shifting amplitude at the end of a rolling unit is smaller, which can make the amplitude difference between adjacent roll shifting cycles greater, it is easier to avoid the uneven edge wear area and to control the strip crown stability. The industrial test shows that the maximum crown fluctuation in a rolling unit decreases by 21.05%, and the maximum crown fluctuation of adjacent strips decreases by 28.57%, which significantly improves the stability of crown control.

Keywords

• hot rolling
• work roll shifting
• crown control
• simulation model