Case Studies in Construction Materials (Jul 2024)

Flexural behavior of assembled FRP-steel Pre-Tightened Teeth Connection (PTTC): Experimental study and failure mechanism

  • Ya-Qing Wang,
  • Dong-Dong Zhang,
  • Ling-Yu Xu,
  • Xing-Kun Xie,
  • Bo-Tao Huang

Journal volume & issue
Vol. 20
p. e03245

Abstract

Read online

This study focused on understanding the flexural failure behavior of a newly-developed assembled FRP-Steel Pre-Tightened Teeth Connection (PTTC) used for rapid connection of pultruded Fiber Reinforced Polymer (FRP) tubular beams. Four-point bending loading tests were conducted on a specific type of assembled joint that incorporated the FRP-Steel PTTC and threaded connections. The results indicated that each component demonstrated a typical flexural behavior with a desired load-bearing capacity. The assembled FRP-steel PTTC exhibited a gradual occurrence of various failure modes, which significantly differed from those observed under uniaxial compressive or tensile loadings that typically exhibit a more singular failure mode. The initial failure is identified as the local transverse shear failure occurring at the upper junction interface of the composites between the FRP segments and the external steel sleeves. It is thus crucial to carefully assess the stress concentration effects during the design process of FRP-steel PTTC and its assembled joints. Corresponding numerical analysis was performed and compared to experimental results, which demonstrated good agreement in relation to deformation, initial failure modes, and bearing capacity. The comparison results indicated that the developed numerical model is capable of predicting the flexural behavior prior to the initiation of the failure process of the assembled composite joints.

Keywords