Experimental and numerical investigations on the micro-damage behaviour of glass fibre-reinforced plastics

Abstract

The formation and influence of micro-damage in glass fibre-reinforced plastics (GFRP) is carried out by numerical and experimental investigations. A quasi-static material characterisation is performed and the stiffness and strength of unidirectional, undamaged material in longitudinal and transverse direction as well as in the 23-plane are determined. Since the desired micro-damage could not be generated in unidirectional laminates due to abrupt failure, a [0∘/90∘]s layup has been identified to be most suitable to generate micro-damage in a reproducible way in the 90° layers, which is done using a tension–tension fatigue test program. During these experiments, micro-damage is detected optically and by means of ultrasonic birefringence, where the latter method shows a reduction in shear modulus due to fibre–matrix debonding prior to final inter-fibre failure. The shear modulus degradation is indirectly measured by the change in the velocity of sound. Since this method is limited to measurements in the 13- and 23-plane, all experiments are accompanied with microstructural simulations with detailed statistical volume elements (SVE), to study the influence of micro-damage under various loading conditions and directions. For loading in fibre direction, no influence on the mechanical properties is observed for the investigated fibre–matrix debonding. However, this is different for transverse loading, where a transverse shear stiffness loss of around 8% results in a decrease of transversal stiffness of around 18%, if the load direction is perpendicular to the damage plane. A similar behaviour is observed for the strength, which is reduced by a factor of 2 for the same configuration.

Keywords

• Glass fibres
• Debonding
• Micro-mechanics
• Non-destructive testing
• Ultrasonics