Scientific Reports (Aug 2024)
Effects of waste oyster shell replacing fine aggregate on the dynamic mechanical characteristics of concrete
Abstract
Abstract Waste oyster shells (WOS) have the potential to serve as a construction material, offering a sustainable alternative to traditional fine aggregates in the production of WOS concrete. This can play a critical role in reducing environmental issues resulting from the overexploitation of river sand and the haphazard disposal of WOS. Although existing research has predominantly focused on understanding the static mechanical characteristics of concrete when WOS is employed, the dynamic mechanical properties have still received less attention. To understand the impact of WOS as a substitute for fine aggregates on the dynamic mechanical properties of concrete, a series of tests employing Split Hopkinson Pressure Bar (SHPB) were carried out. The findings demonstrate that the peak stress and elastic modulus increase as the WOS substitution ratio (S r ) increases from 0 to 20% but exhibit an exponential decline as S r increases from 20 to 100%. This response can be explained by the joint effects of the pore-filling effect caused by WOS sand and the increasing air content caused by WOS sand. As S r increases from 0 to 20%, the pore-filling mechanism becomes predominant as the water absorption rate decreases slightly from 4.31 to 3.83%. However, for S r increasing from 20 to 100%, the negative influence of the air content becomes the primary contributing factor, where the water absorption rate increases from 3.83 to 14.68%. Furthermore, under the same impact pressure, the concrete with S r = 20% absorbed the most energy, providing the best dynamic mechanical performance. These findings highlight the potential use of WOS in concrete for improving its dynamic characteristics, promoting both sustainable construction and enhancing the material properties in impact-resistant structures.
Keywords