Technology and application of dynamic pressure gas secondary drainage through borehole in bottom drainage roadway of high gas outburst coal seam

Abstract

In order to solve the problem of gas overrun and low utilization rate caused by mining pressure relief gas pouring into mining working space in high gas outburst coal seam, this paper used numerical simulation and field application methods to study the efficient extraction of coal gas in front of the working face under the influence of dynamic pressure. The results show that according to the gas concentration monitoring data on site, the coal body in front of the working area was divided into high efficiency extraction zone, effective extraction zone and original extraction zone. The efficient extraction zone was within 20 m in front of the working face, with an average gas extraction concentration of 30% or more. Gas extraction in the effective extraction zone was affected by the dynamic pressure, and the extraction concentration decreased fluctuatingly with increasing distance from the working face. The range of the original extraction area is 50-60 m away, and the gas concentration of the borehole was stable below 10%, which was less influenced by the mining movement. The second extraction technology of dynamic pressure gas in the floor gas extraction roadway of high gas outburst coal seam through the crossing boreholes was better applied in the middle extraction roadway of 12110 working face, the number of extraction holes in the dynamic pressure area was 5%-10% of that in the non-dynamic pressure area, but the monthly extraction volume could reach up to 74.01% of the monthly extraction volume inthe non-dynamic pressure area.

Keywords

• gas extraction in dynamic pressure zone
• mining face
• crossing borehole
• stress distribution
• pressure-relief gas
• numerical simulation