How Planer Settings Affect Timber Properties

Abstract

There are different reasons for planing timber. One is to adjust the cross-sectional dimensions of thickness and width. Another is to adjust the timber's outer shape, usually in order to reduce warp resulting from drying and having the forms of cup, twist, bow, and crook. The end-result depends on the properties of the timber before planing and on the planer design and settings. In the present work it was found that increasing or decreasing the forces exerted on the timber by a four-sided planer does not affect the cutting depth or the twist reduction. The pressure settings do not affect the rectangularity or the amount of unplaned areas on the surfaces either. The possibility to impact the result with this type of planer, apart from the cutting depth and planed dimensions, is slim to none.

Keywords

• Drying deformation
• Planer misses
• Planer settings
• Planing and milling rectangularity
• Warp
• Wood
• Wood quality