Nanomaterials (Nov 2022)

High-Quality <i>SiO</i><sub>2</sub>/O-Terminated Diamond Interface: Band-Gap, Band-Offset and Interfacial Chemistry

  • Jesús Cañas,
  • Daniel F. Reyes,
  • Alter Zakhtser,
  • Christian Dussarrat,
  • Takashi Teramoto,
  • Marina Gutiérrez,
  • Etienne Gheeraert

DOI
https://doi.org/10.3390/nano12234125
Journal volume & issue
Vol. 12, no. 23
p. 4125

Abstract

Read online

Silicon oxide atomic layer deposition synthesis development over the last few years has open the route to its use as a dielectric within diamond electronics. Its great band-gap makes it a promising material for the fabrication of diamond–metal–oxide field effects transistor gates. Having a sufficiently high barrier both for holes and electrons is mandatory to work in accumulation and inversion regimes without leakage currents, and no other oxide can fulfil this requisite due to the wide diamond band-gap. In this work, the heterojunction of atomic-layer-deposited silicon oxide and (100)-oriented p-type oxygen-terminated diamond is studied using scanning transmission electron microscopy in its energy loss spectroscopy mode and X-ray photoelectron spectroscopy. The amorphous phase of silicon oxide was successfully synthesized with a homogeneous band-gap of 9.4 eV. The interface between the oxide and diamond consisted mainly of single- and double-carbon-oxygen bonds with a low density of interface states and a straddling band setting with a 2.0 eV valence band-offset and 1.9 eV conduction band-offset.

Keywords