Fluid–solid coupling simulation of a new hydraulic self-adaptive PDC cutter for improving well-drilling efficiency in complex formations

Abstract

A new type of hydraulic self-adaptive polycrystalline-diamond-compact (PDC) cutter (SAPC) is designed for controlling cutting depth of the PDC bit flexibly and reducing the harm of stick–slip vibration to drilling operation. The fluid–solid coupling movement of SAPC under different well-drilling conditions are simulated and analyzed. The results show that the up-going time of SAPC can be increased by reducing the diameter of the thin connecting pipe, increasing the diameter of the SAPC liquid-cavity, increasing the height of the cavity, increasing the liquid viscosity and increasing the initial spring force/decreasing the elasticity coefficient. Among them, reducing the diameter of thin connecting pipeline and increasing cavity diameter are the most sensitive. The up-going time can also be increased by the way of changing liquid viscosity without changing the structure of SAPC. Increasing the initial spring force and decreasing the elasticity coefficient can also increase the up-going time of the SAPC, however, the response window to the linkage force is reduced. The double-pipeline embedded SAPC can effectively reduce the volume and installation difficulty. The reasonable thin pipeline diameter is 0.2–0.5 mm, and the thick pipeline diameter is more than 2 mm, and the cavity diameter is more than 18 mm. Based on the results of the numerical simulation study, the up-going time of the SAPC is designed over 1.25 s, which meets the performance requirements of the hydraulic SAPC using in complex reservoir drilling, such as carbonate-sandstone reservoir.

Keywords

• New PDC bit
• SAPC
• Fluid–solid coupling
• Numerical simulation