Thermal self-crosslink after etching for regulated preparation of Ti3C2 type MXene membrane and its preliminary gas separation

Abstract

We present an innovative methodology for the synthesis of MXene membranes through a dual-stage process involving etching and subsequent thermal self-crosslinking. A molar ratio of 1 (Al3+):9 (F−) using HCl/LiF was employed to convert raw Ti3AlC2 (MAX phase) into MXene within 48 h at 40 °C. This procedure predominantly yielded monolayers distinguished by diameters exceeding 500 nm, elevated crystallinity and a high overall yield. Advanced characterization techniques, including FESEM, TEM, HRTEM, AFM, XPS, and FTIR, were utilized. Instrumental analysis confirmed the formation of MXene exhibiting a single-flake morphology with diameters exceeding 500 nm. These monolayers were intact and continuous, with smooth peripheries and a uniform thickness of 2.1 nm. The surfaces were predominantly composed of carbon (C), oxygen (O), and titanium (Ti) atoms, interconnected by chemical bonds such as C–Ti–O, C–Ti–OH, C–C, C–O, and Ti–O. In the subsequent phase, vacuum filtration facilitated the assembly of a self-supporting MXene membrane. Thermal treatment at 170 °C for 30 h resulted in the reinforcement of C–Ti–O bonds within the nanosheets, increasing their prevalence to 43.14 % and 19.47 %, respectively. This thermal regulation reduced the interlayer d-spacing from 4.33 to 3.54 Å, which significantly improved the gas separation efficiency beyond the Knudsen diffusion limit, as demonstrated by the αH2/CF4 value exceeding 23.0.

Keywords

• MXene nanosheets
• MXene membrane
• Thermal regulation
• Multilayer structure
• Gas separation